What is a silicone heating pad?

Release Date:

2020-06-19

Author:

Huizhou Shishu Electric Appliance Co., Ltd.


Abstract:

Most people may not be very familiar with silicone heating pads, so below we’ll provide a brief overview of their operating principles and technical specifications.

Most people may be familiar with Silicone heating pad If you’re not very familiar with it, let me briefly introduce the operating principle and technical specifications of silicone heating pads.

1 Electrical properties: The dielectric constant and the dielectric loss tangent of silicone heating sheets exhibit minimal variation over a wide range of temperatures and frequencies. Moreover, the dielectric constant is not only lower than that of typical organic materials but also decreases with increasing temperature.

2 , Heat-resistant sheet: Silicone heating pad It exhibits excellent thermal-oxidative stability and can be formulated into four grades depending on the operating temperature: the first grade is rated for 200°C with a service life of 50 years; the second, for 300°C with a service life of 8 years; the third, for 540°C with a service life of 8 years; and the fourth, for 800°C with a service life of 5 years.

3 Cold resistance: It can be used at temperatures as low as −50°C, and its performance remains unchanged even after repeated thermal cycling.

4 Adhesiveness: Can be applied to the surfaces of glass and ceramics.

nyggwwXUTCSv4lHYkPXCnA.jpg

Silicone heating pad The operation process

1. Note that these electrical devices must be operated continuously at a working temperature below 240°C, with any transient peak not exceeding 300°C.

2. The heater operates in a compressed state, causing the auxiliary pressure plate to adhere to the heating surface. When the chamber temperature does not exceed 240°C, a power density of 3 W/cm² is delivered, thereby enhancing thermal conductivity.

3. The operating temperature under attached mounting conditions may be below 150°C.

4. Under dry-air combustion conditions, due to the material’s thermal resistance, the electrical power density must be kept below 1 W/cm²; if the process is not sustained, the power density may reach 1.4 W/cm².

5. The operating voltage is selected based on the principle of high power at high voltage and low power at low voltage.

Silicone heating pad Installation Precautions

1. The silicone heating pad itself is not waterproof; to prevent leakage, avoid contact with oil, water, and plastics to guard against electrical leakage.

2. When using, the heating element must be placed in close contact with the object being heated, and the surface of the object should be smooth. If the surface is uneven, select a flat area for heating; otherwise, please specify this in advance.

3. Use Silicone heating pad Afterward, the heated surface should not produce smoke or soot.

4. After using a silicone heating pad, avoid disassembly and damage to the heating wire to ensure its service life.

Huizhou Shishu Electric Appliance Co., Ltd. is a company with 10 years of manufacturing experience, dedicated to household far-infrared heat therapy products and specializing in the R&D of thermal compression products. Currently, the company offers a range of products, including far-infrared abdominal wraps, vests, belts, neck and shoulder supports, knee braces, and more. Welcome to inquire.

Online Consultation


%{tishi_zhanwei}%

Recommended Reading


Spring Heating Wire: A Warm and Harmonious Companion for the Family


Spring Heating Wire: A Warm and Harmonious Companion for the Family In today’s fast‑paced modern world, how to bring a touch of warmth and harmony into the home has become a topic of great concern. And the spring heating wire—though it may seem like a simple tool—can actually play an important role in everyday life. It not only offers convenience but also subtly creates a cozy, family‑friendly atmosphere. Imagine coming home on a cold winter day; as the device softly hums, the room gradually fills with gentle warmth—a feeling that is undeniably comforting and joyful. What is a spring heating wire? It is a device that uses electric current to generate heat, typically integrated into home heating systems. Its design resembles a spring, allowing it to adapt flexibly to various settings. Among these options, Teflon‑coated heating wires have gained popularity thanks to their outstanding performance and durability. The high‑temperature resistance and excellent insulation of Teflon make them virtually safe to use, a feature especially important for families with children. A Warm Companion in the Home Picture this: you wake up in the morning, switch on your Teflon‑coated heating wire, and warm air slowly spreads throughout the room, accompanied by a sense of peace and security. Many households rely on such devices during the winter to keep their homes comfortably warm.

2025-02-28

PVC Heating Wire: Bringing Warmth to Your Home


PVC Heating Cable: Bringing Warmth to Your Home In this fast-paced era, the warmth of home is often overlooked. Yet it’s the little details that truly define the quality of life—and among them, choosing the right heating cable makes all the difference. Today, we’ll explore an impressive material: PVC heating cable, and how it can bring warmth and comfort to your family. What Is a PVC Heating Cable? A PVC heating cable is a type of electric cable designed for heating, crafted from polyvinyl chloride (PVC). It boasts excellent insulation and heat resistance, allowing it to operate safely in a variety of environments. Picture the chilly winter days at home—this PVC heating cable becomes your cozy companion, delivering consistent warmth. Functions and Advantages of PVC Heating Cables First and foremost, its primary function is heating. Whether used for underfloor heating or wall‑mounted systems, this cable efficiently raises indoor temperatures, creating a comfortable living environment. Imagine returning to a cold house, only to find the floor beneath your feet pleasantly warm—your mood instantly improves. Second, installing a PVC heating cable is remarkably straightforward. Unlike more complex heating systems, it requires no extensive construction; you can easily lay it yourself at home. Moreover, its…

2025-02-18

Aluminum Foil Heating Pad: Bringing Warmth to the Chilly Season


Aluminum Foil Heating Pads: Bringing Warmth to the Cold Season In the chilly months, what do we all long for most? That’s right—warmth! Imagine this: outside, the wind cuts through your bones, while inside, the air is cozy and toasty—a truly comforting experience. Today, we’re going to talk about aluminum foil heating pads and how they help us stay warm during winter. Especially when equipped with Teflon‑coated heating wires, these pads take winter warmth to a whole new level. How Aluminum Foil Heating Pads Work First, let’s start with the basics. An aluminum foil heating pad is a modern heating material, primarily composed of aluminum foil and Teflon‑coated heating wires. Its operating principle is straightforward: electric current passing through the Teflon heating wires generates heat, which is then evenly radiated into the surrounding air via the aluminum foil. This quickly raises the room temperature, delivering instant comfort. Picture this: you walk in, flip the switch, and warm air envelops you in an instant—an unparalleled feeling of indulgence. What’s more, these pads heat up extremely fast, leaving virtually no waiting time. The Advantages of Teflon‑Coated Heating Wires You might wonder: what makes Teflon‑coated heating wires so special? The answer is numerous. For one, Teflon boasts exceptional properties…

2025-02-08

Product Inquiry

Product Inquiry



We provide you with high-quality products and services.

Submit