How is the quality of an electric heating plate tested?
Release Date:
2021-12-26
Author:
Abstract:
Although the processing equipment for silicone heating wires is essentially the same as that used for organic rubber, do not use the same open‑mill to process both materials. Dedicated cleanroom facilities are required to maintain a pristine environment, as contamination can degrade the mechanical and electrical performance of silicone heating wires. If dedicated processing equipment and facilities are unavailable, proceed with caution.
Note that the contaminated material must be completely isolated from the silicone heating wire and its additives. Since most impurities originate from the rubber compound, and given the inherent properties of the silicone heating wire, the plasticity of the rubber requiring further refining will change after re‑refining, making it easy to coat the roller at a relatively rapid rate. The drum of an open‑type mixer should be filled with cooling water to prevent the rubber from scorching.
If necessary, flame retardants and color masterbatches should be added to the compound. During mixing, some fillers may fall into the receiving pan via the roller; before adding the next batch of filler, these materials should be collected and reintroduced into the rubber. Typically, a rubber scraper is used to remove the filler from the receiving pan—brushes should not be employed, as bristles may shed and contaminate the rubber. Importantly, all fillers should not be added to the compound in a single charge; instead, they should be introduced in 2–3 batches, with the compound thoroughly turned over after each addition.
Recommended Reading
Spring Heating Wire: A Warm and Harmonious Companion for the Family
2025-02-28
PVC Heating Wire: Bringing Warmth to Your Home
2025-02-18
Aluminum Foil Heating Pad: Bringing Warmth to the Chilly Season
2025-02-08