A manufacturer of multi-core heating wires explains the nonlinear resistance characteristics of heating‑wire components.
Release Date:
2020-08-18
Author:
Abstract:
The response time of multi‑core heating‑wire resistors is on the order of nanoseconds—faster than that of vented tubes but slower than TVS devices. In general, this meets the requirements for surge protectors used in electronic circuits. The junction capacitance of zinc oxide varistors typically ranges from several hundred to over a thousand picofarads; under many conditions, they are not well suited for direct use in protecting high‑frequency power lines.
When used to protect AC circuits, its junction capacitance increases leakage; therefore, current must be taken into account when designing protection circuits. Zinc oxide varistors have a high total current rating, but it remains lower than that of the surge arrester.

The multi-core heating wire component behaves such that when the operating voltage across the resistance wire is below its threshold “UN,” the current flowing through the wire is very small, corresponding to a closed valve. When the operating voltage exceeds UN, the current increases proportionally with the valve’s degree of opening.
In addition to its role in protecting the “valve,” the heating cable also provides several other functions. This phenomenon is known as the “secondary‑coil effect” and does not compromise the system’s normal performance. In this context, three key factors must be taken into account: first, the intrinsic capacitance of the zinc‑oxide varistor—on the order of hundreds of thousands of picofarads; second, the leakage current that remains below the system’s operating voltage; and third, the discrete current flowing through the zinc‑oxide varistor via the power‑supply impedance, which can couple and affect other circuits.
Multi‑core heating wire boasts excellent heat resistance, rapid heating, a long service life, stable electrical resistance, and minimal output power deviation. After drawing, it exhibits a uniform measurement range and a smooth surface. It is widely used in industrial electric furnaces of various sizes, heating air‑conditioning units, diverse types of furnaces, heating elements, and electrical appliances, tailored to customer specifications.

Manufacturers of multi-core heating wire components leverage the discrete‑system characteristics of zinc oxide varistors: when an overvoltage occurs across the varistor’s terminals, the device clamps the voltage to a relatively fixed operating level, thereby protecting the downstream circuitry.
Recommended Reading
Spring Heating Wire: A Warm and Harmonious Companion for the Family
2025-02-28
PVC Heating Wire: Bringing Warmth to Your Home
2025-02-18
Aluminum Foil Heating Pad: Bringing Warmth to the Chilly Season
2025-02-08