Why is it necessary to label electric heating tubes with their rated voltage?
Release Date:
2021-02-05
Author:
Abstract:
Why is it necessary to specify the rated voltage requirement for electric heating tubes?
1. When connecting to the switching power supply, the operating voltage should not exceed the rated voltage marked on each heating tube. 10% . If the voltage is below the rated value, the heat output generated by the electric heating element will also decrease.
2. When connecting the terminals of the electric heating tube, tighten the two nuts against each other. Do not apply excessive force to prevent the lead screws from loosening and damaging the heating tube.
3. All portions of the electric heating tube that come into contact with the heating medium must be fully immersed to prevent damage in cases where heat is released slowly and exceeds the allowable operating temperature. Additionally, the exposed wiring should be positioned outside the heater’s insulation or on the exterior of the heater to avoid overheating and potential hazards.
4. The terminals of electric heating tubes shall be kept clean and dry. Otherwise, their dielectric strength will be reduced, and they may be penetrated by short-circuit faults. When used in environments containing chemically corrosive substances, flammable materials, or flammable and explosive liquids or vapors, the connection points of the electric heating tube must be rigorously protected by insulated sealing devices to prevent safety accidents.
5. When heating certain chemical substances such as viscose and others—e.g., sodium nitrate, polyether, paraffin wax—begin by reducing the supply voltage to minimize stress on the electric heating element. Once the material has completely melted into a liquid, increase the voltage to its rated value.
6. When using electric heating tubes, pay attention to the substance being heated to address the issue of sediment buildup.
7. If the electric heating tube is used continuously over a long period, the thick scale and oil deposits accumulated on its surface should be removed promptly; otherwise, the thermal conductivity of the heating tube will deteriorate, leading to excessive heat dissipation at the tube surface and eventual damage.
8. Stainless steel plate electric heating tubes should be stored in a dry warehouse. If the surface becomes damp due to prolonged storage, use a megohmmeter to accurately measure the grounding resistance during use. If it falls below… 1 Megohm /500 When laying down, the electric heating tube should be placed into… 200 Air-dry in a drying oven.
9. Before installation and use, carefully read the relevant instructions for special‑type electric heating tubes to prevent damage.
Recommended Reading
Spring Heating Wire: A Warm and Harmonious Companion for the Family
2025-02-28
PVC Heating Wire: Bringing Warmth to Your Home
2025-02-18
Aluminum Foil Heating Pad: Bringing Warmth to the Chilly Season
2025-02-08