Instructions for Use of the Electric Heating Plate
Release Date:
2021-02-18
Author:
Abstract:
The electric heating sheet is a new type of electric heating product. Compared with traditional metal heating elements, it adheres more closely to the surface of the heated object when in operation, which has earned it widespread favor among customers.
An electric heating sheet is a flexible, thin-film electric heating device. It is manufactured by uniformly distributing tethered and filamentary metallic heating elements between layers of glass fiber fabric coated with high‑temperature‑resistant silicone rubber, followed by molding at elevated temperatures. The product is very thin—typically 0.8 to 1.5 millimeters thick—and lightweight, usually weighing per square meter… 1.3~1.9 Kilograms. It boasts advantages such as rapid electric heating, quick temperature rise, a large heating area, uniform heat distribution, weather resistance, corrosion resistance, environmental friendliness, flame retardancy, and easy installation. It is one of many electric heating devices.
Electric heating plates are widely used across various industries, including providing thermal environments for outdoor communication equipment, outdoor insulation and freeze protection, heating of chemical processing equipment, pipeline freeze prevention, backup battery insulation for outdoor devices, and medical applications.
To put it simply, electric heating plates are often used to heat curved surfaces, such as oil drums, pipelines, and laboratory equipment.

1. When using this electric heating device, be sure to keep the continuous operating temperature below 240 ℃, the instantaneous temperature should not exceed 300 °C ..
2. Silicone rubber electric heating elements can operate and withstand pressure; they may be pressed against the heated surface using an auxiliary pressure plate. Under these conditions, thermal conductivity is excellent, and the operating‑area temperature does not exceed
At 240° C At that time, the power density can reach 3W/cm2。
3. Under adhesive installation conditions, the allowable operating temperature is less than 150 °C.
4. Under air‑drying conditions, due to the material’s temperature‑resistance limitations, the power density should be less than 1w/cm2 ; Under non‑continuous operating conditions, the current density can reach 1.4 W/cm²
5. The principle for selecting operating voltage is: high power at high voltage, low power at low voltage; special requirements may be exempted.
Silicone electric heating boasts advantages such as extremely rapid heating, uniform temperature distribution, high thermal efficiency, robust structural strength, ease of use, long service life, and resistance to aging.
Silicone electric heaters also allow you to select relevant parameters such as size, hardness, thickness, power, and voltage.
Recommended Reading
Spring Heating Wire: A Warm and Harmonious Companion for the Family
2025-02-28
PVC Heating Wire: Bringing Warmth to Your Home
2025-02-18
Aluminum Foil Heating Pad: Bringing Warmth to the Chilly Season
2025-02-08