Placement of Electric Heating Tubes in Electric Heating Equipment
Release Date:
2021-03-01
Author:
Abstract:
A durable electric heating device often prompts customers to inquire about the installation and operational precautions for its heating elements. In fact, depending on the type of heating tube and its installation environment, the specific installation methods and key considerations can vary considerably. On one hand, this is influenced by the manufacturing quality of the heating tube itself and its service life; on the other hand, it hinges on how the tube is installed and positioned within the heating system, which in turn has a significant impact on the uniformity of temperature distribution and the overall longevity of the heating element.
The basic requirements for electric heating tube assemblies are as follows:
1. Ensure uniform temperature distribution within the furnace chamber. In large medium‑temperature and high‑temperature furnaces where radiative heat transfer predominates, electric heating elements are installed not only on the furnace walls and floor but also on the furnace roof and door. Additionally, extra heating elements should be provided in areas with significant heat loss, near the furnace door opening, and adjacent to the discharge port of bottom‑vibrating furnaces. When the furnace chamber is relatively low in height, electric heating elements are typically arranged on both the floor and the roof.
2. Among the three installation methods—corrugated, helical for filament-type electric heating tubes, and corrugated for strip-type electric heating tubes—their service life ranks as follows: filament‑type corrugated, followed by strip‑type corrugated, with filament‑type helical being the least durable. Corrugated filament‑type electric heating tubes offer superior heat‑transfer performance; even when the surface load is relatively high, they still exhibit a longer service life, thereby reducing both the consumption of heating‑tube materials and maintenance labor.
3. Efforts should be made to minimize radiative shielding between the electric heating elements and between the elements and the furnace‑wall support bricks. The installation orientation of the heating elements should ensure efficient heat transfer to the workpiece while preventing localized overheating.
4. For medium‑temperature furnaces, high‑alumina refractory supports should be used; for high‑temperature furnaces operating above 1000°C, more pure alumina refractories are recommended; and for low‑temperature furnaces, standard clay‑based refractories may be employed. The iron oxide content in refractory materials must be kept low, and materials such as asbestos, slag wool, and water glass must not come into contact with the heating elements. These substances can form low‑melting eutectics with the heating elements, leading to element failure, and they can also degrade the oxide protective layer on the heating elements, accelerating oxidation and causing premature failure.
5. Common A single‑head electric heating tube refers to a heating element that does not feature a baffle, threads, or any other fixing mechanisms. Installation methods include: mounting directly onto a bracket; drilling a hole and securing the tube with a copper or other metal sleeve (similar to a baffle‑type heating tube); and, in some cases, using welding to fix the heating tube in place.
6. L-shaped single-head electric heating tubes can typically be directly inserted into the operating environment without requiring additional mounting.
7. Baffle-type electric heating tubes can be used directly or mounted by welding onto a baffle.
8. For threaded single‑head electric heating tubes, the unit is installed by screwing the tube into the designated mounting location. These threaded designs are commonly used for heating liquids; of course, in applications with stringent sealing requirements, welding can also be added to the existing installation.
9. U‑shaped heating elements are typically supplied with fasteners; in most cases, they are installed directly using these fasteners. When fasteners are not used, the element is usually secured with brackets or by welding.
10. Flange Electric Heating Tube Literally speaking, installation and fixation are carried out in accordance with the flange method. Flange installation is generally categorized into connection flanges (bolted) and welded flanges. Under low-pressure conditions or when tightness requirements are not particularly stringent, connection flanges can be used; these are secured by bolting through several pre‑existing or subsequently machined bolt holes, with metal gaskets interposed. For high-pressure applications or for large‑diameter low‑pressure systems, welded flanges are preferred, with the flange being installed and fixed by welding.
Recommended Reading
Spring Heating Wire: A Warm and Harmonious Companion for the Family
2025-02-28
PVC Heating Wire: Bringing Warmth to Your Home
2025-02-18
Aluminum Foil Heating Pad: Bringing Warmth to the Chilly Season
2025-02-08