What were the shortcomings of the previous electric heating plates?
Release Date:
2021-03-23
Author:
Abstract:
What were the shortcomings of the previous electric heating plates?
① Previously, the electric heating motherboard of the heating plate had flat surfaces on both sides. When the heating wire and insulating wire were wound in a spaced‑around configuration on the heating mother board, after the motherboard was bent into a ring shape it could only be fitted over the inner liner, which easily caused the heating wire and insulating wire to shift during the bending process. Moreover, thermal expansion of the metal components of heating wire 101 and the insulating wire could readily lead to short circuits due to contact between them; therefore, such configurations were not suitable for use.
② In the aforementioned structure of the electric heating plate, after the heating wire and the insulating heating wire slide, the temperature of the heating wire rises, or the arrangement and spacing of the insulating heating wires change, resulting in an uneven temperature distribution within the inner tank during heating. This can easily reduce the heating efficiency.
③ In the past, the extension heating wire of the electric heating element passed through the upper insulating plate and emerged from the sleeve. During assembly and wiring, it was typically necessary to pull out the heating wire. If handled carelessly, the lead-out hole in the upper insulating plate could easily be damaged, resulting in cracking of that hole. When the extension heating wire comes into contact with the housing, it can cause an electrical leakage.
④ When assembling the clamping device previously used for the heating element, the heating element is bent into a ring and then fastened to the fixed washer 2 with screws. Since the heating element generates a restoring force when bent, installation and assembly are time-consuming and labor-intensive.
⑤ Previously, the heating element was secured with screws after being tightened; however, since metals expand when heated, there was no clearance to accommodate the expansion of the inner tank. Prolonged use readily caused the heating element to deform and loosen, making it difficult to maintain a permanent position on the liner.
The electric heating element comprises a winding sheet wound with heating wires and insulating heating wires; upper and lower insulating sheets for isolating the winding sheet; a metal base housing to accommodate the winding sheet and the upper and lower insulating sheets; a metal cover plate that overlies the base housing; and a clamping mechanism. The clamping mechanism includes a pair of clamping members and a fixing member. The extended heating wires at both ends of the winding sheet pass through the upper insulating sheet and the cover plate, and are externally connected to a power source.
The winding plate is equipped with locating grooves on both sides, and the heating wire and the insulating heating wire are positioned within these grooves, preventing them from slipping and coming into contact—thus avoiding short circuits—after the bottom shell is bent. At each end of the metal cover plate, there are locking slots; the clamping device snaps into these slots, with its jaws pressing against one another to keep the two ends of the cover plate parallel during use. An insulating shim is placed between the cover plate and the upper insulating sheet; this shim sleeves over the extended heating wire, preventing direct contact between the wire and the cover plate and thereby averting electrical leakage. Additionally, the fixing component of the clamping device may be fitted with an elastic element to counteract deformation of the heating sheet on the inner container that could otherwise lead to loosening.
Recommended Reading
Spring Heating Wire: A Warm and Harmonious Companion for the Family
2025-02-28
PVC Heating Wire: Bringing Warmth to Your Home
2025-02-18
Aluminum Foil Heating Pad: Bringing Warmth to the Chilly Season
2025-02-08