What factors should be considered when selecting an electric heating tube?
Release Date:
2021-04-12
Author:
Abstract:
When selecting an electric heating tube, power must be taken into account:
Through standardized and unified calculations, the power of electric heating tubes can be conveniently determined in the following three steps:

1. Under the condition of maintaining a constant medium temperature, calculate the actual power required to sustain that temperature.
2. Calculate the power required to heat from the initial temperature to the set temperature within a specified time.
3. Based on the two calculation results above, select the heater model and quantity. The total power should be set to the greater of the two values, taking into account… 1.2 Factor.
Electric heating tube The choice needs to take voltage into account:
Before purchasing, you must verify the voltage rating of the electric heating tube. This verification corresponds to the fixed resistance value marked on the device. The higher the voltage, the greater the power. An incorrect selection can easily result in the voltage exceeding the heating tube’s rated capacity, causing the resistance wire to burn out and potentially damaging the heating tube itself. Standard voltage ratings: 24V,36V,48V,110V,220V,380V , Typically, the voltage we refer to is the rated voltage.
Electric heating tube Rated voltage:
The rated voltage of an electric heating tube refers to the voltage specified during redesign and marked on the tube’s housing. In other words, the rated voltage is the voltage supplied by the customer when we undertake manufacturing and production. Typically, there are… 24V,48V,110V,220V,380V Wait.
Operating voltage of the electric heating tube:
( 1 ) Multiple power supplies connected in series. For a set of electric heating tubes, or for electric heating tubes connected in series to a power supply, the operating voltage of the heating tubes refers to the voltage specified in the design for connecting that group of heating tubes.
( 2 ) Single power supply. For a single electric heating tube connected to the power supply, the operating voltage of the heating tube refers to the voltage applied to the component specified in the design, i.e., its rated voltage.
Note: This concerns whether multiple electric heating elements are connected in series or in parallel. Therefore, when assessing the voltage, if several heating elements need to be connected, it is necessary to determine the voltage across each individual element. Electric heating tube The voltage must be determined by whether the components are connected in series or in parallel.
The effect of voltage on power:
When the power of an electric heating tube is fixed, if the supply voltage is lower than the design voltage, the power will decrease, and the heating efficiency will also decline. Conversely, if the supply voltage exceeds the design value, the power will increase, potentially overloading the circuit and causing the internal heating element to burn out or even damaging the heating tube itself.
Recommended Reading
Spring Heating Wire: A Warm and Harmonious Companion for the Family
2025-02-28
PVC Heating Wire: Bringing Warmth to Your Home
2025-02-18
Aluminum Foil Heating Pad: Bringing Warmth to the Chilly Season
2025-02-08