Industry News

06

2021-02


What should be noted when using explosion-proof electric heating tubes?

An explosion-proof electric heating tube is a heating device that consumes electrical energy and converts it into thermal energy. It consists of a housing, filling material, a ceramic head, and an explosion-proof enclosure. During operation, a low‑temperature fluid medium enters the inlet under pressure; utilizing the principles of fluid thermodynamics, the explosion‑proof electric heating tube transfers the high‑temperature heat generated along a designated heat‑exchange flow path inside the heating vessel, thereby raising the temperature of the heated medium. In general, when using explosion‑proof electric heating tubes, six key points should be observed.

06

2021-02


What are the advantages of carbon fiber heating sheets?

Carbon fiber, after undergoing a fiberization process, exhibits enhanced malleability, allowing it to be shaped into a wide variety of forms. Carbon‑fiber heating sheets are produced by fiberizing carbon fibers and then forming them into sheet‑like structures that can rapidly generate heat in a short period. Other products with similar rapid‑heating capabilities include carbon‑fiber heating tubes, heating filaments, and heating cables, among others.

05

2021-02


Why is it necessary to label electric heating tubes with their rated voltage?

Why is it necessary to specify the rated voltage for electric heating tubes? When connecting to a switching power supply, the operating voltage should not exceed 10% above the rated voltage marked on each tube. If the voltage falls below the rated value, the heat output of the heating tube will also decrease. When connecting the terminals of the heating tube, tighten the two nuts oppositely; avoid applying excessive torque to prevent the lead screws from loosening and damaging the heating tube.

02

2021-02


Introduction to Types and Prices of Heating Cables

So‑called heating wires are electrical conductors that generate heat through the Joule heating effect when powered. There are many types of heating wires; in basic physics, they are also referred to as electric heating elements or resistor wires. Depending on the conductive material, they can be classified into chromium alloy wire, constantan wire, carbon fiber, and others. In Western countries, high‑grade carbon fiber materials are widely used and highly technologically advanced, whereas in China, lower‑to‑mid‑range applications typically rely on carbon fiber combined with other heating methods. Based on the insulation and conductor materials, they can further be divided into PVC, Teflon, silicone rubber, fiberglass, and more. Below, we will explain in detail the connection methods for heating wires and provide an overview of their typical pricing.

01

2021-02


The temperature resistance of multi-core heating wires from spring‑type heating wire manufacturers.

Spring heating wire manufacturers refer to silicone resistance wires as silicone electric heaters or silicone heating cables. They are primarily composed of alloy heating wires encased in a high‑temperature‑resistant textile sheath made of silicone rubber. These cables feature rapid heating, uniform temperature distribution, high thermal efficiency, and excellent flexibility. The cables may be constructed as single‑wire resistors with copper conductors, which are then coated with a silicone/PVC insulation layer to form the heating element.

< 1...222324...33 >
Product Inquiry

Product Inquiry



We provide you with high-quality products and services.

Submit