Common Problems and Causes of Heating Tubes
Release Date:
2021-03-12
Author:
Abstract:
Heating tubes are manufactured by encasing electric heating wires within seamless metal tubes, filling the gaps with highly thermally conductive and insulating magnesium oxide powder, then shrinking the tube and machining it into various configurations as required by the user. They feature a simple structure, high thermal efficiency, excellent mechanical strength, and strong adaptability to harsh environments. Even so, certain malfunctions remain unavoidable. . Below are some examples of common issues: The reasons for uneven heating in electric heating tubes, heating tubes, and stainless steel heating tubes are as follows: :
1. The resistance wire of the electric heating tube has uneven hardness.
Due to the non-uniform hardness of the resistance wire material, the pitch of the wound heating wire becomes uneven after stretching. This phenomenon typically occurs during the retrieval of the heating wire from the well. Additionally, uneven tension during the winding process can also lead to irregularities in the spiral pitch.
2. Improper design of the resistance wire in the electric heating tube
Typically, the heating wire in an electric heating tube is designed in a spiral, or spring-like, configuration. If the diameter of the winding mandrel… D With the diameter of the electric heating wire D The ratio is d/D/d>8 In that case, sagging will occur when adding powder; this is due to the coil spacing of the heating wire, with the top section being sparser and the bottom section denser.
3. Improper operation of the electric heating tube process
The exposed lead-out rod during powder filling does not meet the specifications. If it is too short, the vibration‑induced stretching of the heating wire’s lead-out rod can occur while tapping and feeding powder; if it is too long, pressing on the lead-out rod while vibrating and adding powder may cause localized thinning or excessive density of the heating wire, potentially leading to short circuits between heating‑wire circuits. Improper operation of the tube‑shrinking process can also compromise the uniformity of the heating‑wire distribution.
4. The electric heating tube powder-filling equipment has defects.
For example, the amplitude of the auxiliary equipment is unstable, the lifting speed of the guide rod is uneven, and the rate of powder leakage varies. Even when all parameters are within normal limits, the magnesium oxide powder still ends up thin on top and dense at the bottom.
Recommended Reading
Spring Heating Wire: A Warm and Harmonious Companion for the Family
2025-02-28
PVC Heating Wire: Bringing Warmth to Your Home
2025-02-18
Aluminum Foil Heating Pad: Bringing Warmth to the Chilly Season
2025-02-08