Applications of Electric Heating Tubes in the Industrial Sector
Release Date:
2021-03-14
Author:
Abstract:
Electric heating tubes are widely used in industry and can be found almost everywhere; today, Keda will discuss their applications in industrial settings. These electric heating tubes have already achieved extensive adoption across various industries. Their heating elements are made of alloy materials, and the thermal‑resistance characteristics of the material enable automatic adjustment of heating power. According to technical specifications, temperature control dynamically modulates the heating output, allowing the heated catalytic medium to flow through equipment pipelines and thereby enhancing catalyst activity, which in turn facilitates the production of a wider range of products and improves economic efficiency. However, during the application process, such electric heating tubes may encounter various issues. To address these promptly and ensure proper operation, it is essential to understand their operating principles. Below is a brief overview of how they work: The heating element is connected in a delta configuration, and a temperature sensor is installed at the outlet of the tube. A thermocouple serves as the temperature‑sensing component, capable of measuring temperatures up to 800°C. Adjusting the heating power is primarily accomplished by controlling the firing angle of the bidirectional thyristors within the voltage‑regulation module, thereby modifying the module’s output voltage and, consequently, the heating performance of the electric heating tube. For safe startup, first switch on the power supply and confirm that the emergency stop button is disengaged. Provided there are no fault alarms, press the start button; this will energize the contactor and charge the upper terminal of the voltage‑regulation module. A medium‑temperature detection device monitors the temperature of the fluid inside the system. After the temperature signal is converted into an electrical current by a temperature transmitter, it is routed to the normally closed emergency‑stop contact. This signal is compared with the preset base heating temperature, and the electric heating tube sends a control signal to the intelligent controller of the voltage‑regulation module. The controller then adjusts the firing angle of the three‑terminal bidirectional thyristors, thereby regulating the module’s output voltage and, in turn, the heater’s power, ultimately achieving precise control of the medium temperature.
Recommended Reading
Spring Heating Wire: A Warm and Harmonious Companion for the Family
2025-02-28
PVC Heating Wire: Bringing Warmth to Your Home
2025-02-18
Aluminum Foil Heating Pad: Bringing Warmth to the Chilly Season
2025-02-08