Processing heating plates
Product Description
| Custom Processing: | is | Brand | Shi Shu | Model: | Custom-made |
| Material: | Silicone, PVC, aluminum foil | Room-temperature resistance: | Custom-made (Ω) | Voltage: | Custom-made (V) |
| Main uses: | Household appliances, thermal insulation equipment, heating devices, health-related appliances | Product Certification: | UL | Thickness: | 2 (mm) |
Aluminum foil heating sheet:
Aluminum‑foil‑composite heating‑wire assemblies are the most widely used defrosting and compensating heating elements in refrigerators and freezers. They feature a large, uniformly distributed heating surface and can also be configured for segmented heating. These assemblies consist of a heating wire laminated with aluminum foil and can be custom‑formed into various shapes to meet specific application requirements. Power ratings range from less than one watt to several hundred watts. The products comply with IEC 79‑15 explosion‑proof standards, bearing the Ex na IIT1x marking, and are suitable for use in fluorine‑free refrigerators that employ R600a as the refrigerant. The product line is divided into three series: the P series (standard), the PG series (high‑power), and the PS series (high‑temperature‑resistant). The P series has a lower power density; at ambient temperatures, its operating temperature remains below the maximum service temperature of the encapsulating material. The PG series offers higher power density, and its operating temperature may exceed the encapsulant’s maximum service limit, necessitating the use of a temperature limiter for safe operation. The PS series employs heat‑resistant silicone rubber as the encapsulant, with a typical maximum service temperature of up to 150°C.
Silicone heating pad:
Silicone rubber heating sheets (SCS), also known as silicone rubber heating pads, electric heating films, heating tapes, or heating plates—among other names—are manufactured by laminating two layers of glass fiber fabric with a layer of silicone rubber. As a thin‑sheet product (typically 1.5 mm thick), it offers excellent flexibility, enabling close, intimate contact with the object being heated. Its pliability allows it to conform more easily to the heating surface, and its shape can be customized to suit specific heating requirements, ensuring heat is delivered precisely where needed. While conventional flat heating elements often rely on carbon as the primary material, silicone rubber heaters utilize arranged nickel‑alloy resistance wires, making them safe and reliable for use. Moreover, these sheet‑type heaters can be fabricated into a wide variety of shapes to meet diverse application needs.
A silicone heating sheet is a flexible, bendable, thin‑sheet electric heating element. It is manufactured by uniformly embedding strip‑shaped or wire‑shaped metallic heating elements between layers of glass fiber fabric coated with high‑temperature‑resistant silicone rubber, followed by high‑temperature molding. The product is exceptionally thin, typically 0.8 to 1.5 mm thick, and lightweight, usually weighing 1.3 to 1.9 kg per square meter. When energized, it heats rapidly with a quick temperature rise, offering a large heating surface, uniform heat distribution, excellent weather resistance, corrosion resistance, environmental friendliness, flame retardancy, easy installation, long service life, and high dielectric strength. It finds applications in a wide range of electric heating devices.
[Parameters]
Product thickness: 0.8–2.0 mm; Compatible power supply: 0–380 VDC/VAC.
Specific gravity ----- 1.6 g/cm³
Power density — 2 W/cm²
Color ----- Orange-red, Grass green, Black
Dielectric strength > 500 MΩ
Heat capacity ------ 1.0 J/g·K
Continuous operating temperature < 240℃
Hardness ----- 60±5 shore
Adhesive installation, operating temperature < 150℃
Tensile strength > 180 kg/cm²
Resistive voltage > 2100 VDC/min
Flame retardancy — meets UL94 V0
Adhesive strength > 50 N/100 mm
[Characteristics]
1. Maximum operating temperature of the insulating material: 250°C
2. Maximum operating temperature: 250℃–300℃
3. Insulation Resistance: ≥5 MΩ
4. Withstand Voltage: 1500 V/5 s
It can be manufactured in various shapes and sizes (such as circular, elliptical, and conical).
It can be installed by drilling, with adhesive backing, or using a strapping method.
Maximum dimensions: 1.2 m × X m; minimum dimensions: 15 mm × 15 mm; thickness: 1.5 mm (minimum 0.8 mm, maximum 4.5 mm). Lead wire length: standard 130 mm; custom lengths are available for dimensions outside the above range.
Applying an adhesive backing—also known as pressure-sensitive adhesive or double-sided tape—ensures that the silicone heating pad adheres securely to the surface of the object being heated, making installation convenient.
Custom manufacturing is available to meet customer requirements for voltage, power, dimensions, and product shape (e.g., oval, conical, etc.).
[Instructions for Use]
1. When using this type of electric heating element, be sure to note that its continuous operating temperature should not exceed 240°C, and its instantaneous maximum temperature should not surpass 300°C.
2. Silicone heating pads can operate under compressive conditions; to ensure tight contact with the heated surface, use an auxiliary pressure plate. Under these conditions, thermal conductivity is excellent, and when the operating‑zone temperature does not exceed 240°C, the power density can reach 3 W/cm².
3. Under adhesive‑type installation conditions, the allowable operating temperature is less than 150°C.
4. Under air‑dry‑burn operating conditions, due to material temperature‑resistance limitations, the power density should be less than 1 W/cm²; under non‑continuous operating conditions, the power density may reach 1.4 W/cm².
5. The selection of operating voltage shall follow the principle of high power–high voltage and low power–low voltage; special requirements may be exempted.
[Installation Method]
Due to its varied shapes, this product can be installed and used in multiple ways—such as crimping, double-sided adhesive mounting, hole‑based positioning, or room‑temperature vulcanization—depending on the specific site conditions. It boasts a service life of up to five years. Silicone heating pads are widely employed across 18 major industries, including outdoor communication equipment for thermal management, outdoor insulation and freeze protection, chemical‑process heating, pipeline freeze prevention, backup battery insulation for outdoor devices, medical applications, solar‑energy systems, and more.
1. Heat transfer machine heating plate
2. Heating element for the cup (tray) roasting machine
3. Heater for oil drums
4. Heat-sealing machine heating element
5. Heating and heat preservation for medical equipment
6. Heating of Chemical Pipelines
7. Heating of Large-Scale Equipment
8. Semiconductor manufacturing equipment
9. Heating and insulation for various mechanical instruments and meters
10. Medical devices, such as blood analyzers, respiratory therapy devices, and hydrotherapy equipment
11. Anti-freezing for military facilities, aircraft instruments, and hydraulic equipment
12. Battery Heating
13. Food Service Equipment
14. Factory joining and localized assembly? Any application requiring flexible shapes or designs.
15. Analytical Instruments
16. Aerospace
17. Antifreeze Equipment
18. The industries and specific applications of the transportation equipment are as follows:
(1) Petrochemical industry: electric heat tracing or constant-temperature maintenance for equipment such as gas transmission pipelines, oil pipelines, and valves.
(2) Chemical industry: conveying pipelines, processing vessels, reactors, and hot-melt adhesive equipment—electric heat tracing or constant-temperature maintenance.
(3) Beer Industry: Maintaining constant temperature in heavy oil transfer pipelines for boiler equipment in the power workshop.
(4) Food Industry: Food‑handling pipelines require constant temperature control, and equipment must be protected against freezing in winter.
(5) Automotive Industry: Dispensing robots, automated adhesive application equipment for automotive body panels and windshields, electric heat tracing or constant-temperature maintenance.
(6) Mechanical Engineering: transport containers, vacuum chambers, hydraulic or pneumatic pumps, metering and conveying equipment, electric trace heating, or temperature‑maintaining systems.
(7) Experimental Study: Electric heat tracing or constant-temperature control for sample gas analysis pipelines and industrial exhaust gas analysis pipelines.
(8) Nuclear Power Plants: Stack Flue Gas Analysis (with electric trace heating or constant‑temperature control for flue gas sampling lines)
(9) Environmental Engineering: Water Treatment, Cleaning Systems (Underground Pipeline Electric Heating or Temperature Maintenance)
(10) Offshore platforms: electric heat tracing or constant-temperature maintenance for oil pipelines, valves, and other equipment.
(11) Other: How to place an order for electric heat tracing or constant-temperature control systems for paint equipment and wax‑making equipment.

Keywords:
Why choose our products?
The company’s main products include PVC heating wires, silicone heating sheets, multi-core heating wires, silicone heating wires, aluminum foil heating sheets, spring‑type heating wires, carbon‑fiber heating wires, Teflon heating wires, carbon fiber heating wires, and carbon‑fiber heating sheets.
All-Powerful Hot Core
Suitable for various forms, including heating cotton, silicone heating sheets, and silicone heating wires, it flexibly adapts to diverse heating requirements.
Flexible and constant temperature
Soft and flexible, it conforms to complex surfaces while maintaining precise and stable temperature control.
High-Efficiency Thermal Control
Rapid heating, even heat distribution, and precise temperature control meet the needs of diverse heating applications.
Safe and heat-resistant
Excellent insulation performance, resistant to high- and low-temperature aging, and ensures stable, reliable long-term operation.
Precise temperature rise
Rapid and uniform heating, coupled with a temperature-control system, enables precise heating management.
Online Consultation
We are committed to providing you with high-quality products and professional services. Please keep your phone handy, and we will contact you as soon as possible. Thank you for your support!
Related Information