+
  • IMG_0143(1788329023441).jpeg

Silicone heating pad 2


Silicone heating sheets, also known as silicone electric heating films, silicone rubber heating elements, or drum heaters, are flexible electric heating components assembled from high‑temperature‑resistant, highly thermally conductive, electrically insulating, and mechanically robust silicone rubber, high‑temperature‑grade fiber‑reinforced materials, and metallic heating‑film circuits. They consist of two layers of glass‑fiber fabric laminated with a double‑sided pressure‑bonded silicone layer. As a thin‑sheet product—typically 1.5 mm thick—they exhibit excellent flexibility, enabling close, intimate contact with the object being heated. Their pliability allows them to conform closely to the heated surface, and their shape can be customized to suit specific heating requirements, ensuring heat is delivered precisely where needed. While conventional planar heaters often rely on carbon as the primary material, silicone heaters utilize arranged nickel‑alloy resistance wires, offering reliable performance. Moreover, these surface‑type heaters can be fabricated into a wide variety of shapes to meet diverse application needs.


Product Description

Advantages of silicone heating pads:

1. The heating‑wire material is relatively soft, exhibits excellent compressibility, and offers superior thermal conductivity and electrical insulation. It also features a wide range of thickness options, making it well suited for filling cavities. Both sides possess natural adhesion, providing high operability and ease of maintenance.

2. The primary purpose of selecting a thermally conductive silicone sheet is to reduce the contact thermal resistance that arises between the surface of the heat source and the interface with the heat-dissipating component; the thermally conductive silicone sheet can effectively…

The gap of the filled contact surface;

3. Since air is a poor thermal conductor, it significantly impedes heat transfer across contact surfaces; therefore, thermal conductive silicone grease is applied between the heat source and the heat sink.

The sheet can squeeze air out of the contact area;

4. With the addition of a thermally conductive silicone sheet, the contact surface between the heat source and the heat sink can achieve better, more thorough contact, ensuring direct, face-to-face contact. At temperature…

The response in terms of degree can achieve the smallest possible temperature difference;

5. Thermal conductive silicone sheets offer tunable thermal conductivity and superior thermal stability.

7. Thermal conductive silicone sheets compensate for manufacturing tolerances in the structure, thereby reducing the precision requirements for heat sinks and thermal management components. 8. Thermal conductive silicone sheets possess excellent electrical insulation properties…

Adhesion performance (this property requires the addition of appropriate materials during manufacturing);

9. Silicone heating pads provide shock absorption and sound‑damping effects.

10. Thermal conductive silicone sheets offer the convenience of easy installation, testing, and reusability.

Disadvantages of silicone heating pads:

Compared with thermal grease, thermal silicone sheets have the following drawbacks:

1. Thermal conductive silicone sheets with thicknesses below a certain threshold are characterized by complex manufacturing processes and are prone to damage during production-line handling.

2. Thermal grease has lower thermal resistance and delivers better short-term heat dissipation, whereas thermal silicone pads have higher thermal resistance and do not provide as good short-term thermal performance as thermal grease.

3. Price: Thermal grease is relatively inexpensive because only a thin layer needs to be applied, whereas thermal silicone pads are priced per square meter and are somewhat more costly.

 

[Characteristics]
1. Maximum operating temperature of the insulating material: 250°C

2. Maximum operating temperature: 250°C–300°C

3. Insulation resistance: ≥5 MΩ

4. Withstand Voltage: 1500 V/5 s

 

It can be manufactured in various shapes and sizes (such as circular, elliptical, and conical).

It can be installed by drilling, with adhesive backing, or using a strapping method.

Maximum dimensions: 1.2 m × X m; minimum dimensions: 15 mm × 15 mm; thickness: 1.5 mm (minimum 0.8 mm, maximum 4.5 mm). Lead wire length: standard 130 mm; custom lengths are available for dimensions outside this range.

Applying pressure-sensitive adhesive or double-sided tape to the back allows the silicone heating pad to adhere securely to the surface of the object being heated, making installation convenient.

Custom manufacturing is available to meet customer requirements for voltage, power, dimensions, and product shape (e.g., oval, conical, etc.).

 

[Instructions for Use]
1. When using this type of electric heating element, be sure to note that its continuous operating temperature should not exceed 240°C, and its instantaneous maximum temperature should not surpass 300°C.

2. Silicone rubber heating elements can operate under compressive stress; to achieve this, use an auxiliary pressure plate to ensure tight contact with the heated surface. Under these conditions, thermal conductivity is excellent, and when the operating‑zone temperature does not exceed 240°C, the power density can reach 3 W/cm².

3. Under adhesive‑type installation conditions, the allowable operating temperature is less than 150°C.

4. Under air‑dry‑burn operating conditions, due to material temperature‑resistance limitations, the power density should be less than 1 W/cm²; under non‑continuous operating conditions, the power density may reach 1.4 W/cm².

5. The selection of operating voltage shall follow the principle of high power–high voltage and low power–low voltage; special requirements may be exempted.

 

[Installation Method]
Due to its varied shapes, this product can be installed and used in multiple ways—such as crimping, double-sided adhesive mounting, hole‑based positioning, or room‑temperature vulcanization—depending on the specific site conditions. It boasts a service life of up to five years. Silicone heating pads are widely employed across 18 major industries, including outdoor communication equipment for thermal management, outdoor insulation and freeze protection, chemical‑process heating, pipeline freeze prevention, backup battery insulation for outdoor devices, medical applications, solar‑energy systems, and more.

1. Heat transfer machine heating plate

2. Heating element for cup (tray) baking machine

3. Heater for oil drums

4. Heat-sealing machine heating element

5. Heating and heat preservation for medical equipment

6. Heating of Chemical Pipelines

7. Heating of Large-Scale Equipment

8. Semiconductor manufacturing equipment

9. Heating and heat preservation for various mechanical instruments and meters

10. Medical devices, such as blood analyzers, respiratory therapy devices, and hydrotherapy equipment.

11. Anti-freezing for military facilities, aircraft instruments, and hydraulic equipment

12. Battery Heating

13. Food Service Equipment

14. Factory joining and localized assembly? Any application requiring flexible shapes or designs.

15. Analytical Instruments

16. Aerospace

17. Antifreeze Equipment

18. The industries and specific applications of the transportation equipment are as follows:

(1) Petrochemical industry: electric heat tracing or constant-temperature maintenance for equipment such as gas transmission pipelines, oil pipelines, and valves.

(2) Chemical industry: conveying pipelines, processing vessels, reactors, and hot-melt adhesive equipment—electric heat tracing or constant-temperature maintenance.

(3) Beer Industry: The heavy oil delivery pipeline for boiler equipment in the power workshop is maintained at a constant temperature.

(4) Food Industry: Food‑handling pipelines require constant temperature control, and winter freeze‑protection is necessary for machinery and equipment.

(5) Automotive Industry: Dispensing robots, automated adhesive application equipment for automotive body panels and windshields, electric heat tracing or constant-temperature maintenance.

(6) Mechanical Engineering: transport containers, vacuum chambers, hydraulic or pneumatic pumps, metering and conveying equipment, electric heat tracing, or temperature‑maintaining systems.

(7) Experimental Study: Electric heat tracing or constant-temperature control for sample gas analysis pipelines and industrial exhaust gas analysis pipelines.

(8) Nuclear Power Plant: Stack Flue Gas Analysis (electric trace heating or constant‑temperature control for flue gas sampling lines)

(9) Environmental Engineering: Water Treatment, Cleaning Systems (Underground Pipeline Electric Heating or Temperature Maintenance)

(10) Offshore platforms: electric heat tracing or constant-temperature maintenance for oil pipelines, valves, and other equipment.

(11) Other: How to place an order for electric heat tracing or constant-temperature control systems for paint equipment and wax‑making equipment.

Why choose our products?



The company’s main products include PVC heating wires, silicone heating sheets, multi-core heating wires, silicone heating wires, aluminum foil heating sheets, spring‑type heating wires, carbon‑fiber heating wires, Teflon heating wires, carbon fiber heating wires, and carbon‑fiber heating sheets.

All-Powerful Hot Core

Suitable for various forms, including heating cotton, silicone heating sheets, and silicone heating wires, it flexibly adapts to diverse heating requirements.

Flexible and constant temperature

Soft and flexible, it conforms to complex surfaces while maintaining precise and stable temperature control.

High-Efficiency Thermal Control

Rapid heating, even heat distribution, and precise temperature control meet the needs of diverse heating applications.

Safe and heat-resistant

Excellent insulation performance, resistant to high- and low-temperature aging, and ensures stable, reliable long-term operation.

Precise temperature rise

Rapid and uniform heating, coupled with a temperature-control system, enables precise heating management.

Online Consultation



We are committed to providing you with high-quality products and professional services. Please keep your phone handy, and we will contact you as soon as possible. Thank you for your support!

Product Name:

Submit
%{tishi_zhanwei}%
Product Inquiry

Product Inquiry



We provide you with high-quality products and services.

Submit